Skip to main content

Repeat Screen

Show one screen again at each wake, until you press the button.

Written by Ryan Kulp

By default your TRMNL moves to the next screen in your playlist every time it wakes up. Repeat screen changes that. Your device shows the same screen again each time it wakes, with fresh data, until you press the button. Then it moves to the next screen and repeats that one.

This is useful when one screen matters more than the rest, or when you want to flip through your playlist by hand.

Prerequisites

  • A TRMNL OG or TRMNL X

  • TRMNL firmware 1.8.0 or later

Step 1 - Open your playlist

Inside TRMNL, go to Playlists and pick the device you want to change. Repeat screen is set per device, so each device can behave differently.

Step 2 - Turn on Repeat screen

Click Repeat screen in the bar above your playlist.

The button stays highlighted while it is on. Click it again to go back to the normal rotation.

Step 3 - Move between screens

On a TRMNL OG, press the button on the back. On a TRMNL X, tap the touchbar. Your device shows the next screen in your playlist and repeats it.

Step 4 - You're Done!

Your device still wakes up on its usual refresh rate. Each time it does, it redraws the screen you are on with the latest data, but it does not move on. Restarting the device also moves it to the next screen.

Turn it on or off from your TRMNL OG

In your device settings, open Controls and set the Special Function to Toggle Repeat Screen. Then press the button on the back for 1-2 seconds and let go. When Repeat screen turns on, your device shows the same screen again. When it turns off, your device moves to the next screen.

Troubleshooting

I don't see the Repeat screen button.
It only appears for a TRMNL OG or TRMNL X running TRMNL firmware 1.8.0 or later. Update your firmware from the device settings, then wait for the device to check in once. Devices on other firmware (BYOD and BYOS) do not show it.

My device moved to another screen on its own.
Repeat screen skips a screen it cannot show. This happens when the repeated screen is outside its schedule in the playlist, or when it has nothing to display. Check the playlist item's schedule, then press the button to get back to it.

The repeated screen shows old data.
A repeated screen redraws with the latest data the plugin has. How often that data changes depends on the plugin's own refresh rate, not on Repeat screen. Click "Force Refresh" on the plugin settings page to update it now.

Did this answer your question?